Magnetic POGO PIN Connectors

• Self-Aligning: Magnets automatically guide mating halves into correct position
• Self-Locking: Magnetic force holds connection secure without mechanical latches
• Quick Connect/Disconnect: One-handed operation, no tools required
• Tolerance Compensation: Spring-loaded pins accommodate misalignment up to ±1.0mm
• High Cycle Life: 10,000 to 100,000+ mating cycles
• Gold-Plated Contacts: Low contact resistance, excellent corrosion resistance
• Customizable Magnet Strength: 200g to 2000g holding force
• Sealed Options: IP67/IP68 available for harsh environments
• ROHS Compliant: Environmentally friendly construction

Note: All specifications customizable. Pin count, magnet strength, housing material, and sealing tailored to application.

1. Magnetic Connector – Self-Locating, Self-Latching
Spring-loaded POGO pins combined with rare-earth magnets. The magnets pull the connector into alignment and hold it in place without latches or screws. No fumbling in the dark. No broken plastic clips. Just bring the two halves close and they snap together.

2. 1A to 10A Per Pin – Signal, Power, or Both
Smaller pins (1A–3A) for low-current signaling and data. Larger pins (5A–10A) for battery charging and power delivery. All in the same connector body. Spring force per pin: 50g to 300g, selected by current and required contact stability.

3. Two Magnet Families – Standard or High-Temperature
Neodymium (NdFeB) magnets work from -40°C to +85°C, suitable for most indoor and commercial products. Samarium Cobalt (SmCo) extends the range to +150°C - designed for under-hood automotive, industrial ovens, and outdoor solar equipment. Holding force from 200g to 2000g, selectable by connector size.

4. Sealed to IP68, Rated for 10k to 50k+ Cycles
Working stroke: 0.5mm to 2.0mm, enough to accommodate misalignment and surface contamination. Sealed versions achieve IP68 (dust-tight, continuous immersion). Mating cycles: 10,000 to over 50,000 depending on series. PBT or PA6T housings (UL94V-0). Custom pin counts from 2 to 24, pitch from 1.27mm to 5.0mm. ROHS compliant.

• Pin Count & Layout: 2 to 24 pins, circular or rectangular, custom matrix
• Connector Shape: Circular, rectangular, oval, or custom
• Connector Size: 8mm to 50mm diameter or custom
• Magnet Type: NdFeB (standard, lower cost) or SmCo (high-temp, corrosion resistant)
• Magnet Strength: 200g to 2000g holding force
• Magnet Configuration: Single, dual, quad, or custom array
• Pin Pitch: 1.27mm to 5.0mm
• Current Rating: Standard (1-3A) or high-current (5-10A)
• Spring Force: 50g to 300g per pin
• Tip Style: Flat, crown, pointed, radius
• Plating Thickness: 0.1μm to 3.0μm gold over nickel
• Housing Material: PBT (standard), PA6T (high-temp), LCP (reflow), PEEK (ultra-high-temp)
• Housing Color: Black, white, gray, blue, red, or custom
• Environmental Sealing: IP67, IP68 with O-rings or potting
• Cable Integration: Pre-attached wires with custom lengths and terminations
• PCB Mounting: SMT, through-hole, or panel mount
• Polarization: Keyed housings, asymmetric magnet placement
• Packaging: Tray, tube, tape and reel (SMT), or custom

Self-Aligning, Quick-Connect Interconnect Solutions

• Wearable Device Chargers: Used in smartwatches, fitness trackers, smart rings, hearing aids, and medical wearables where users need simple, one-handed charging without precise alignment.
• Medical Device Docking Stations: Deployed in patient monitors, CPAP machines, infusion pumps, and portable diagnostic equipment requiring easy docking, cleanability, and reliable connections in clinical environments.
• Consumer Electronics Docks: Integrated into smartphone docks, tablet stands, wireless earbud charging cases, and smart speaker charging cradles for user-friendly daily charging.
• Test & Programming Fixtures: Used in production test jigs, firmware programming stations, and calibration equipment where quick device swap is essential for throughput.
• Industrial & Robotics: Implemented in robotic tool changers, AGV charging contacts, modular sensor systems, and quick-disconnect interfaces requiring rugged, self-aligning connections.
• EV Charging & Micromobility: Deployed in electric scooter charging ports, e-bike battery docks, and small EV charging connectors where users need simple plug-in charging.
• IoT & Smart Home Devices: Used in smart doorbells, security cameras, and sensor nodes for weatherproof, easy-connect power and data interfaces.
• Marine & Outdoor Equipment: Integrated into waterproof connectors for boat electronics, outdoor sensors, and portable lighting requiring corrosion resistance and reliable sealing.

1)Experienced in interface connectors and cable assemblies, we can offer a wide range of standard production capabilities such as stamping, injection molding, prototype, connectors and cable assemblies, customized connectors and cable assemblies, and custom retail packaging.

2)Advancing interconnect technology. Our team can offer a world-class interconnect experience from initial consultation to final delivery to meet solutions for our customer's interconnect challenge, our personalized design and engineering package include CAD drawings, 3D models, prototypes and testing samples.

3)Building connections worldwide. We can provide a wide range of interconnect solutions in order to meet the needs of customers in many different types of markets,some of the most popular markets such as:high-end consumer electronics, data storage, set-top box, medical, home security,industrial, audio/video, desktop and mobile computer units.

4)High quality products and competitive pricing.

5)Exceeding expectations. our Quality Policy is Quality First, Customer First.

1.Mike, test fixture engineer in Ohio
"The magnetic POGO pin connector on our programming fixture is a game-changer. Operators just drop the board on, magnets snap it into place. 50,000 cycles and still working. Good product."

2.Lisa, IoT product manager in Canada
"Outdoor smart sensor uses 4-pin magnetic connector with IP68 rating. Survives rain and snow. Pre-cabled with 1m wire. Easy field installation. Good product."

3.Raj, medical device manufacturer in India
"CPAP machine dock uses 6-pin magnetic connector. Patients just set the machine on the dock-no precise alignment needed. IP67 for easy cleaning. Good quality."

4.Yuki, consumer electronics engineer in Tokyo
"Smart speaker charging dock uses 3-pin circular magnetic connector. Magnets pull the speaker into correct position every time. 500g holding force is perfect. Good product."

• Payment method: Credit card or T/T (optional for large amounts). Western Union PayPal
• T/T payment generally supports 100% advance payment.
• Lead time: Normally in 5-10 working days after payment received.
• Sample policy: Samples are always available for each model for standard products.
• Samples can be ready in 3-5 working days once payment received.
• Shipping port: Shenzhen, China.

Hot Tags: magnetic pogo pin connectors, China magnetic pogo pin connectors manufacturers, suppliers, factory